Samsung VP-L600B Owner's Instruction Manual page 53

Playing back the Tape
Notes:
VP-L600/L600B/L610/L610B/L610D/L630/L650 feature a monaural audio system.
If your TV or VCR are stereo, connect the audio cable to the input "L" of TV or VCR.
You can use an S-VIDEO cable to obtain better quality pictures if you have the S-VIDEO
connector on your TV.
Close the LCD panel while viewing playback on a TV screen in order to avoid picture distortion.
Playback
1. Use the TV/VIDEO button to select VIDEO on your TV.
2. Connect a power source (battery or AC Power Adapter)
to the camcorder.
Set the power switch to PLAYER mode.
3. Insert the tape you want to watch.
Make sure that STOP is displayed.
4. Press the (PLAY/STILL) button.
The picture should appear on the TV after
2 to 3 seconds.
Press (STOP) to stop playing.
If the tape reaches its end during playback, the tape
will rewind automatically.
Notes:
Vibration from the built-in speaker can cause picture distortion.
It is best to turn the built-in speaker off when your camcorder is connected to the TV.
The playback system (Hi8/8mm) is selected automatically, depending on the tape format.
VP-L600/L600B/L610/L610B/L610D/L630/L650 can playback both Hi8 and 8mm.
This camcorder does not support LP recording and playback.
ENGLISH
PLAYER
PLAY/STILL
53