Safety Instructions - Siemens SED2 VFD Operating Instructions Manual

Safety Instructions

The following guidelines are provided for your safety, to prevent damage, and to extend the
service life of the SED2 product and any connected equipment. Read this information carefully.
Specific Warnings, Cautions, and Notes are provided in the relevant sections of this manual.
WARNINGS:
•
The SED2 uses hazardous voltages and controls potentially dangerous rotating
mechanical parts. Non-compliance with warnings or failure to follow the
instructions contained in this manual can result in loss of life, severe personal
injury, or serious damage to property/equipment.
•
Only authorized personnel should work on this equipment, and only after
becoming familiar with all local regulations and ordinances; safety notices; and
installation, operation, and maintenance procedures in this manual. Successful
and safe operation of this equipment depends upon its proper handling,
installation, operation, and maintenance.
•
Before carrying out any installation and commissioning procedures, you must
read all safety instructions and warnings, including all warning labels attached to
the equipment. Make sure that the warning labels are kept in a legible condition
and ensure missing or damaged labels are replaced.
•
Observe the regulations of Safety Code VBG 4.0 (in particular, "Permissible
Deviations when Working with Live Parts") whenever measuring or testing is
performed on live equipment. Also, use suitable electronic tools.
•
Only use this equipment for the purpose specified by the manufacturer.
Unauthorized modifications and the use of spare parts and accessories that are
not sold or recommended by the manufacturer of the equipment can cause
fires, electric shocks, and injuries.
•
Prevent the general public from accessing or approaching this equipment.
NOTE:
Keep these Operating Instructions near the equipment and available to all users.
Siemens Building Technologies
Safety Instructions
3