Table of Contents
Advertisement
Symptom
When the screen is exposed
to direct sunlight during
recording, the screen turns
red or black for an instant.
During recording, the date/
time does not display.
The beep sound is not
heard.
There is a time difference
between the point where
you press the Recording
start/stop button and the
point where the recorded
video starts/stops.
The recording stops.
You cannot record a photo
image.
108
108
•
Do not expose the LCD screen to direct sunlight.
•
Set "Date/Time Display" to on. page 84
•
Set the "Beep Sound" to "On."
•
The beep sound is temporally off while the camcorder records videos.
•
When the Audio/Video cable jack is connected to the camcorder, the beep sound will automatically turn
off.
•
On your camcorder, there may be a slight time delay between the point where you press Recording
start/stop button and the actual point where the recorded video starts/stops. This is not an error.
•
The internal temperature of your camcorder is unusually high. Turn off your camcorder and leave it for a
while in a cool place.
•
Your camcorder is damp and moist inside (condensation). Turn off your camcorder and leave it for
about 1 hour in a cool place.
•
Set your camcorder to Record mode. page 24
•
Release the lock on the write-protection tab of the memory card if set.
•
The storage media is full.
Use a new memory card or format the storage media. page 80
Remove unnecessary images. page 69
Explanation/Solution
Troubleshooting
Advertisement
Table of Contents
