When installing: If the thermal pads installed in the M.2-solid-state-drive slots are broken, replace them with
new ones.
1030 Wireless-LAN card
Note: This information is only for the user-replaceable modules.
For access, remove this FRU:
• "1010 Base cover assembly" on page 63
Removal steps of the wireless-LAN card
Step
Screw (quantity)
2
M2 × L2.5 mm, flat-head, nylon-coated (1)
When installing: Plug the gray cable into the main connector and the black cable into the auxiliary
connector.
1040 Memory module
For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 63
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
65