Screw (quantity)
M2 × 4 mm, flat-head, nylon-coated (4)
When installing:
• Ensure that the connectors are attached firmly.
• Ensure that the base cover assembly is attached firmly; otherwise, battery connection might fail.
1030 Wireless LAN card
For access, remove this FRU:
• "1010 Base cover assembly" on page 34
Removal steps of the wireless LAN card
Unplug the connectors by using the antenna RF connector removal tool or pick the connectors with your
fingers and gently unplug them as shown.
Color
Black
.
Chapter 5
Removing or replacing a FRU
37