When installing:
• Plug the grey cable into the main connector on the WLAN card; plug the black cable into the auxiliary
connector on the WLAN card.
• Ensure that you attach the sponges
a
to the rear cover assembly as shown.
Removing an LCD FRU for models with touch panel
This section provides instructions on how to remove an LCD FRU for models with touch panel.
3010 Strip cover
For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 63
• "1150 LCD unit" on page 79
90
P1/X1 ExtremeHardware Maintenance Manual