Setting The Wireless Remote Control Acceptance (Wl.remote) - Samsung SCD6040 Owner's Instruction Book

The Camera : Functions

Setting the Wireless Remote Control Acceptance (WL.REMOTE)

✤
You can enable or disable the Wireless Remote Control for use in Camera mode.
✤
Using the Wireless Remote Control, you can easily and remotely manipulate your camera. Refer to page 40 for setting the
Wireless Remote Control for Camcorder use.
✤
Using the Wireless Remote Control provided, you can take a delayed picture using the SELF TIMER button (refer to page
105).
1. Turn your camera on by setting the Power Switch to
2. Press the MENU button.
The top menu including
3. Press the LEFT or RIGHT button to select
The submenu including WL.REMOTE displays
4. Press the DOWN button to select WL.REMOTE , then press RIGHT button.
The available options of OFF and ON are displayed.
5. Select an option by pressing the UP or DOWN button.
The selected option is applied.
6. Press the OK button to apply your selection.
7. Press the MENU button to exit the menu screen.
Notes
✤
Available Remote Control buttons in each mode:
(MOVIE) for recording: START/STOP, DISPLAY, W / T (before recording), SELF TIMER
(PLAY) for movie: PLAY, PAUSE, STOP, FF, REW
(PROGRAM), A, S, M, SCENE, MYSET : PHOTO, DISPLAY, W / T, SELF TIMER
(CAMERA) mode.
(SET) is displayed.
(SET), then press the DOWN button.
ENGLISH
BACK: SET:OK
93 93