4. Start Web Management
The following shows how to start up the Web Management of the
Industrial Managed Switch. Note the Industrial Managed Switch is
configured through an Ethernet connection, please make sure the
manager PC must be set on the same IP subnet address.
For example, the default IP address of the Industrial Managed Switch is
192.168.0.100, then the manager PC should be set at 192.168.0.x
(where x is a number between 1 and 254, except 100), and the default
subnet mask is 255.255.255.0.
IGS Industrial Managed Switch
RJ-45/UTP-Cable
IP Address:
192.168.0.x
IP Address:
192.168.0.100
Figure 4-1: IP Management Diagram
7