Start Web Management; Login The Managed Switch - Planet XGSW-28040 Quick Installation Manual

24-port 10/100/1000mbps with 4 shared sfp plus 4-port 10g sfp plus managed switch

Hide thumbs Also See for XGSW-28040:

6. Start Web Management

The following shows how to start up the Web Management of the XGSW Managed

Switch. Note the Managed Switch is configured through an Ethernet connection,

please make sure the manager PC must be set on the same IP subnet address.

For example, the default IP address of the XGSW Managed Switch is

192.168.0.100, then the manager PC should be set at 192.168.0.x (where x

is a number between 1 and 254, except 100), and the default subnet mask is

255.255.255.0.

PC / Workstation

with

IE Browser

IP Address:

192.168.0.x

1. Use Internet Explorer 7.0 or above Web browser, enter IP address

http://192.168.0.100 (the factory-default IP address or that you have just

changed in console) to access the Web interface.

RJ-45/UTP-Cable

Figure 6-1 IP Management Diagram

XGSW Managed Switch

IP Address:

192.168.0.100

Table of Contents