Advertisement

5 YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this sewing machine for a period of 5 years from date of the
original purchase, to be free of defective parts due to imperfections in the workmanship and materials,
subject to the following conditions, exclusions and exceptions.
EURO-PRO Operating LLC will, at its option, repair or replace this sewing machine free of charge if it
fails to operate according to specifications due to factory defects in materials or workmanship within one
year of purchase date. For 5 years from date of purchase, EURO-PRO Operating LLC will repair or
replace defective sewing machine head parts; owner pays for labor charges. The sewing machine must
be shipped freight and insurance prepaid to:
US:
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901
Canada: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, Qc, H4S 1A7
A copy of your sales receipt and $15.95 for handling and return packaging/shipping charges must be
included.*
The electrical equipment (motor, rheostat, control, light, electronic parts, etc.) are warranted from defects
in material and workmanship for a period of two years from the date of original purchase. Non-durable
parts including, without limitation, needles, belts, bobbins, bulbs, bobbin cases, shuttles, springs and
parts which normally require replacement are specifically excluded from this warranty.
This warranty is in effect provided the sewing machine is used only for normal household use by the
original purchaser when new, and is given reasonable good care and proper maintenance in accordance
with the accompanying instruction manual. The manufacturer is not held responsible for damage,
normal wear, accident, abuse, neglect, negligence or if the machine has been repaired by unqualified
personnel.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific
obligations expressly assumed by it under the terms of the limited warranty. In no event is EURO-PRO
Operating LLC liable for any indirect, incidental or consequential damages of any nature whatsoever.
Some states do not permit the exclusion or limitation of incidental or consequential damages, so the
above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state or province to province.
*Important: Carefully pack the item to avoid damage during shipping. We recommend you insure the
package (as damage in shipping is not covered by your warranty). Be sure to include a copy of your
sales receipt and attach a tag to the machine with your name, address and telephone number. Please
include $15.95 to cover return shipping and handling.
-----------------------------------------------------------------------------------------------------------------------------------
OWNERSHIP REGISTRATION CARD
Please fill out and mail the product registration card within ten (10) days of purchase. The registration will
enable us to contact you in the unlikely event of a product safety notification. By returning this card, you
acknowledge to have read and understood the instructions for use, and warnings set forth in the
accompanying instructions.
Return to:
US:
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY, 12901
Canada: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, Qc, H4S 1A7
___________________________________________________________________________________
Appliance Model
___________________________________________________________________________________
Date Purchased
Name of Store
___________________________________________________________________________________
Owner's Name
___________________________________________________________________________________
Address
City
State/Prov.
Zip/Postal Code
Instruction Manual
Please read the instructions carefully before operating
the machine.
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901 Tel.: 1 (800) 361-4639
412N
Model

Advertisement

Table of Contents
loading

Summary of Contents for Shark 412N

  • Page 1 Please read the instructions carefully before operating EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY, 12901 the machine. Canada: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, Qc, H4S 1A7 ___________________________________________________________________________________ Appliance Model 412N ___________________________________________________________________________________ Model Date Purchased Name of Store ___________________________________________________________________________________ Owner’s Name...
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Matching needle / fabric / thread When using an electrical appliance, basic safety instructions should always be NEEDLE,FABRIC,THREAD SELECTION GUIDE followed, including the following: “Read all instructions before using this sewing machine.” FABRICS THREAD NEEDLE SIZE “DANGER - To prevent the risk of electric shock:” A sewing machine should Lightweight fabrics-thin cottons.voile, never be left unattended when plugged in.
  • Page 3: Troubleshooting Guide

    Details of the machine Trouble shooting guide Correction Problem Cause 1.Rethread the machine 1.Reverse sewing lever 1.The machine is not threaded correctly 2.Reduce the thread tension(lower 2.The thread tension is too tight number) 3.The thread is too thick for the needle 2.Pattern selector dial Upper thread 3.Select a larger needle...
  • Page 4: Blind Hem

    Accessories Blind hem Foot control Adaptor 1.Fold the fabric as illustrated in figure (1) 2.Place the fabric under Brush the foo t. Tu rn the handwheel forwards until the needle sewings to the left.It should just picrce the fold of the fabric.
  • Page 5: Connecting The Machine To The Power Source

    Buttonholes Connecting the machine to the power source Preparation 1.Connect plug "A" to the machine and plug "B" into the mains socket. 1.Raise the presser foot lever, remove the metallic presser foot, and replace 2.Turn on power switch "ON" 3.Connect the foot control ‘C’ to the machine. on a buttonhole foot.(note: Before setting buttonhole foot, turn the handwheel 4.The speed of the machine can be regulated by applying pressure to and make sure that the feed dogs is below the needle plate and the needle...
  • Page 6: Winding The Bobbin

    Winding the bobbin Zigzag/Overlock stitching Place empty bobbin on winding spindle ,and place spool on the spool pin. 1.There are 4 patterns of zigzag for selecting . Turn the pattern selector dial to the stitch trace you need(4 - 7). Wind thread a few times by hand round the empty bobbin in a clockwise direction .
  • Page 7: Straight Stitching

    Inserting the needle Straight stitching 1.There are three kinds of straight stitch for your choice. Turn the pattern Change the needle regularly,especially selector dial to the one you need. if it is showing signs of wear and 2.Set the needle at the highest position by turning hand wheel causing problems.
  • Page 8 Threading the upper thread Bring up the lower thread 1.Take the thread through the guide from right to left. 1.Raise the presser foot , hold the upper thread with the left hand ,turn 2.Push thread tension release bar to left, then guide the thread down the handwheel anticlockwise until the needle is raised.

Table of Contents