Zooming In And Out - Samsung SC-MX20 User Manual

Memory camcorder
Hide thumbs Also See for SC-MX20:
Table of Contents

Advertisement

recording

ZOOMING IN AND OUT

Use the zoom function for close-up or wide-angle recording.
This memory camcorder allows you to record using optical 34x power zoom
and 1200x digital zoom.
You can zoom with the zoom lever or the Control (W/T) button on the LCD panel.
Zoom magnification over 34x is done through digital image processing,
and is therefore called digital zoom. Digital zooming is possible up to 1200x.
Set "Digital Zoom" to "On". ➥page 67
To zoom in
Slide the Zoom lever towards T (telephoto).
(Or press the Control button (
To zoom out
Slide the Zoom lever towards W (wide-angle).
(Or press the Control button (
If you operate the Zoom (W/T) lever during recording, the sound of the
lever may be recorded as well.
You can also zoom with the Control (W/T) button on the LCD panel.
The minimum possible distance between camcorder and subject while
maintaining sharp focus is about 1cm (about 0.39 inch) for wide angle
and 1m (about 39.4 inch) for telephoto.
The focus changes when zooming after focussing manually.
Focus automatically or seize the desired scene by zooming before
focussing manually. ➥page 58
Optical zoom preserves the movie quality, but during digital zoom the
quality of image may suffer.
Fast zooming or zooming in subject of far distance may produce slow
focusing. In this case, use "Manual Focus". ➥page 58
It is recommended to use "Anti-Shake (HDIS)" with handheld recording
if the subject is zoomed in and enlarged.
Frequent use of zooming in / out consumes more battery power.
) on the LCD panel.)
) on the LCD panel.)
W: Recording wide area
(wide-angle)
T: Recording enlarged
image (telephoto)
W: Wide angle
T: Telephoto
English_46

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents