Insignia NS-PMG278 Quick Setup Manual

QUICK SETUP GUIDE
27" QHD LED
Gaming Monitor
NS-PMG278
PACKAGE CONTENTS
FIND YOUR USER GUIDE ONLINE!
• 27" QHD LED Gaming Monitor • DisplayPort cable
1 Go to www.insigniaproducts.com.
• Stand base • HDMI cable
2 Use the search bar to find NS-PMG278.
• Screw (M4 10 mm) • Audio cable
3 Select Support & Downloads.
• Dual link DVI cable • Quick Setup Guide
4 Next to User Guide, select the language you want.
• Power cord
FEATURES
Front
AUTO button Adjustment buttons MENU Power
button button
DESCRIPTION FUNCTION
AUTO button Selects the video input source or closes the menu when it is open.
Adjustment buttons Navigate up or down in the menu or increase or decrease a setting.
MENU button Opens the menu and confirms selections.
Power button Turns your monitor on or off.
Power cord connector Plug the AC power cord into this connector.
Cable lock slot Slide a lock cable through this slot to secure your monitor to another object.
USB upstream port Connect one end of the USB upstream cable to the USB upstream port on the monitor,
then connect the other end to a USB port on your computer or video game console.
USB downstream ports Connect USB devices such as a mouse or keyboard to these downstream ports.
Dual link DVI jack Connect a computer with a DVI cable to this port.
HDMI jacks Connect a computer or a video game console with an HDMI jack to one of these ports.
DisplayPort Connect a computer with a DisplayPort to this port.
Audio IN jack Connect a computer's audio out jack to this jack.
Headphone jack Connect headphones to this jack.
Before using your new product, please read these instructions to prevent any damage.
Q41G78S197603A
Back
Power cord
connector
Cable
lock slot
USB DisplayPort Headphone
Dual link
upstream jack
DVI jack
port
USB HDMI jacks Audio IN
downstream jack
ports
USING THE STAND
How do I prepare my monitor stand?
(not for use with wall mounting)
You'll need: Soft surface and a Phillips screwdriver
1 Place the monitor screen face down on a cushioned, clean surface
with the bottom edge hanging over the edge of the surface.
2 Rotate the monitor stand down until it locks into place.
3 Push the stand base onto the stand.
4 Tighten the screw to secure your monitor to the base.
OR
USING A WALL MOUNT
How do I prepare my monitor for wall mounting? (not for use with a monitor stand)
You'll need: Soft surface and a Phillips screwdriver
1 Place the monitor screen face down on a 2 Remove the four screws that secure the stand to the back of your monitor.
cushioned, clean surface.
1 2
TURNING ON MY MONITOR
Press the power button on the front of your monitor.
3 Attach the wall-mount bracket to your monitor. See the
instructions that came with your wall mount for more
information about how to correctly mount your monitor.
Your monitor takes type M4 wall-mount screws.
3
Your monitor has four VESA
mounting holes on the back. If you
attach a wall-mount bracket to the
back of your monitor, make sure that
you attach it to all four holes. If you
do not use all four mounting holes,
your monitor may fall and cause
property damage or personal injury.
Power button