Jump-Start Procedures - Lincoln 2016 MKT Service Quick Reference Manual

Hide thumbs Also See for 2016 MKT:
Table of Contents

Advertisement

FUEL SHUTOFF:
In the event of a moderate to severe collision, this vehicle includes a fuel pump shutoff
feature that stops the flow of fuel to the engine. Not every impact will cause a shutoff.
Should the vehicle shut off after a collision, you may restart the vehicle. For vehicles
equipped with a key system:
1. Switch off the ignition.
2. Switch on the ignition.
3. Repeat steps 1 and 2 to re-enable the fuel pump.
For vehicles equipped with a push button start system:
1. Press the START/STOP button to switch off the ignition.
2. Press the brake pedal and press the START/STOP button to switch on the ignition.
3. Remove your foot from the brake pedal and press the START/STOP button to switch
off the ignition.
4. You can either attempt to start the engine by pressing the brake pedal and the
START/STOP button, or switch on the ignition only by pressing the START/STOP
button without pressing the brake pedal. Both ways re-enable the fuel system.
JUMP-STARTING:
The battery is located on the driver's side of the engine compartment.
• Follow all normal jump-starting precautions as outlined in other AAA/CAA
publications and those provided by the manufacturer.
• Ensure that all electrical accessories and the ignition switch are turned OFF and
the ignition key is removed from the ignition before connecting jumper cables or
a jumper box to the discharged vehicle
Ground Location
8

Advertisement

Table of Contents
loading

Table of Contents