Faq - TP-Link Archer C2600 User Manual

FAQ

Q1. What can I do if I forgot my wireless password?
The default wireless password is printed on the label of the router. If the password has
been altered, please connect your computer to the router using an Ethernet cable and
follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Basic > Wireless
Q2. What can I do if I forgot my login password of the web management
page?
The default username and password of the web management page are
lowercase). If your router supports Password Recovery and you have enabled it,
please follow the steps below to reset the password without resetting the router:
Note: Make sure the Internet access is available before using this method.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Click Forgot password
mailbox you set.
3. Log in to your mailbox to copy the verification code.
4. Paste the verification code on the window which pops up in Step 2.
5. Click Confirm (the default login username and password will be reset as
the click).
6. Use admin (in lowercase) as both username and password to log in.
Tips: Please refer to Password Recovery
If you have altered the username and password but Password Recovery is disabled:
1. Reset the router to factory default settings: press and hold the Reset button for about
7 seconds and then release;
2. Visit http://tplinkwifi.net, and enter
password to log in.
Note: The router must be reconfigured after a reset to access the Internet. Please note down your new login
password for future use.
Q3. What can I do if I cannot log in to the router's web management
page?
This can happen for a variety of reasons. Please try the methods below to login again.
to retrieve or reset your wireless password.
> Send Code, and the verification code will be sent to the
to learn how to configure Password Recovery.
admin (in lowercase) as both username and
admin (in
admin after
93