Ip & Mac Binding - TP-Link Archer C2600 User Manual

Chapter 9
9. 3. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device's IP address to its MAC address. This will prevent ARP Spoofing and
other ARP attacks by denying network access to an device with matching IP address in
the Binding list, but unrecognized MAC address.
I want to:
How can I
do that?
Done!
Prevent ARP spoofing and ARP attacks.
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Advanced >
3. Enable ARP Binding.
4. Bind your device(s) according to your need.
To bind the connected device(s):
Click to add the corresponding device to the
To bind the unconnected device
1 ) Click Add in the
2 ) Enter the MAC address
bind. Enter a Description
3 ) Tick the Enable This Entry
Now you don't need to worry about ARP spoofing and ARP
attacks!
Security > IP & MAC Binding.
Binding List section.
and IP address
for this binding entry.
check box and click OK.
Network Security
Binding List.
that you want to
53