TP-Link Archer C2600 User Manual page 101

4. Disable DHCP:
1 ) Go to Network
2 ) Deselect Enable DHCP Server
Now you can go to
WDS status is Run, it means WDS bridging is successfully built.
Q5. What can I do if I cannot access the Internet even though the
configuration is finished?
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced
As the follow picture shows, if IP Address is a valid one, please try the methods
below and try again:
> DHCP Server.
and click Save.
Advanced > Status
> Status to check Internet status:
> Wireless to check the WDS status. When the
97