Table of Contents
Advertisement
0-Chapter 5(GODREJ)
9/20/98 5:11 PM
C h a p t e r
T
A
HE
NSWERING
In this chapter, you will learn how to check your TAD greeting message, monitor
incoming calls, play and erase messages, and access your machine from a remote
telephone.
Note: the SF3000T uses electronic momory as a recording medium.
Recording time is depending on the content of the message, the total recording time
(TAD OGM + AUTO OGM + ICM) is about 12 minutes.
Checking Your TAD Greeting Message
For information about how to record your first TAD greeting message, see page 2.19.
1
Press OGM.
The display shows the
time when the message
was recorded.
The display then counts
down the time as the
message is played back.
Monitoring an Incoming Call
1
When the call monitoring
option is on and an
incoming message is
being recorded, you hear
the callerÕs voice through
the speaker.
2
If you want to speak to
the caller, lift the
handset.
Page 2
F i v e
M
ACHINE
Play
Erase
OGM
TIME:09-10 12:45
TAD OGM : 13s
à If you have not yet recorded a TAD
greeting message, an error appears in
the display. You must record a TAD
greeting message before you can set the
machine to TAD mode.
To change a previously recorded
greeting message, simply record a new
one. Your machine automatically
records the new message over the old
one. For instructions, see page 2.19.
à You can turn off call monitoring.
For more information, see page 7.10.
à The machine stops recording the
callerÕs message and you can speak
directly to the caller.
C
F
T
A
M
HAPTER
IVE :
HE
NSWERING
ACHINE
5.1
Advertisement
Table of Contents
