Table of Contents
Advertisement
The Answering Machine
Recordng
TAM
Message
(SF-3100T
only)
4-2
The TAM (Telephone Answering Machine) message is an
outgoing message (OGM) which plays whenever a call comes
in and the machine is in TAM Mode. For more information
about reception modes, see "Reception Modes" on page 3-6.
1
Press and hold OGM until you hear a beep.
The display starts counting the recording time.
2
Speak into the microphone when 'RECORD'
appears in the display. Make sure that you are
within a 30cm range.
You can record a message which lasts up to 60
seconds.
•
You are advised to record a message of less than 15 sec-
onds in duration to prevent the fax receive from mal-
functioning due to a long message.
•
Press Stop or OGM if you want to stop recording
before the time is up.
•
After the message has been recorded, the machine
briefly displays the date and time when the message
was recorded. Then, it displays the elapsed time as the
message plays back automatically.
Checking Your TAM Greeting Message
The TAM greeting message plays back when your machine is
in TAM Mode and someone places a call to you.
1
Press OGM.
The display shows the time when the message
was recorded.
The display then counts down the seconds as the
message is playing back.
•
If you have not yet recorded a TAM greeting message,
an error appears in the display.
Advertisement
Table of Contents
