Samsung SF3000 Operator's Manual page 86

Samsung facsimile operator's guide
Hide thumbs Also See for SF3000:
Table of Contents

Advertisement

0-Chapter 7-1(GODREJ)
S
PECIAL
¥ INK SAVE _ You can save ink when making a copy with this feature.
Choose OFF to turn off this feature.
Choose MED to use 25% less ink.
Choose MAX to use 50% less ink.
¥ MESSAGE CONFIRMATION REPORT _ A confirmation report shows whether the
transmission was successful or not, how many pages were sent, etc.
Choose ON to print a confirmation report automatically each time you send a fax.
Choose OFF to turn this feature off.
Choose ERROR to print only when an error occurs, and the transmission was
unsuccessful.
¥ AUTOMATIC TX/RX JOURNAL REPORT _ A journal report shows specific
information concerning transmission or reception activities, the times and dates of up
to 40 of the most recent transmissions or receptions.
Choose ON to print journal automatically after every 40 transmissions or receptions.
Choose OFF to print journal manually.
¥ REMOTE RECEIVE MF CODE _ (SF3000 only) The remote receive code allows you to
initiate fax receive from an extension phone plugged into the EXT. LINE jack. If you
pick up the extension phone and hear fax tones, enter the remote receive code and the
fax will start receiving. The password is preset to
Enter the desired code (0 to 9) on the number keypad.
¥ ERROR CORRECTION MODE _ This mode compensates for poor line quality and
ensures accurate, error-free transmission with any other ECM-equipped facsimile
machine. If the line quality is poor, transmission time may be increased when ECM is
enabled.
Choose ON to turn Error Correction Mode on.
Choose OFF to turn Error Correction Mode off.
¥ AUTO ANSWER ON RING COUNT _ You can select the number of times your
machine rings before answering an incoming call. If you are using your machine as
both a telephone and a fax machine, we suggest you set the ring count to at least 4 to
give you time to answer.
Enter a number shown on the display by using the number keypad.
¥ RING VOLUME _ You can adjust ring volume.
Choose L (Low) for a soft ring.
Choose M (Medium) for a normal ring.
Choose H (High) for a high ring.
If you choose OFF, it turns the ringer off. The machine will work normally even if the
ringer is set to OFF.
9/20/98 5:19 PM
Page 1
F
EATURES
9
at the factory.
C
S
S
HAPTER
EVEN :
PECIAL
7.9
F
EATURES

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sf3000tSf-3000iSf-3000ti

Table of Contents