Samsung SCX-4720FN User Manual page 219

Display
[No Answer]
No. Not
Assigned
Invalid Cartridge
Or
No Cartridge
No. Not
Available
[No Paper]
Add Paper
Operation
Not Assigned
Paper Jam 0
Open/Close Door
Paper Jam 1
Open/Close Door
Paper Jam 2
Check Inside
[Power Failure]
Priority Fax
Function Full
[Retry Redial?]
9.14 T
ROUBLESHOOTING
Meaning
The receiving fax
machine has not
answered after several
redial attempts.
The one-touch or speed
dial location you tried to
use has no number
assigned to it.
You have used an
unauthorized cartridge.
You have tried to delete
the number for a delayed
fax job.
The paper in the paper
tray has run out.
You are doing the Add/
Cancel operation, but
there are no jobs
waiting.
Paper has jammed in the
feeding area of the paper
tray.
Paper has jammed in the
fuser area.
Paper has jammed in the
paper exit area.
Power has turned off
then on and the
machine's memory has
not been saved.
The priority fax jobs
queue is full.
The machine is waiting
for a specified time
interval to redial a
previously busy station.
Suggested solutions
Try again. Make sure that the
receiving machine is operational.
Dial the number manually using
the number keypad or assign the
number. For storing a number, see
"Automatic Dialing" on page 7.19.
You must use a Samsung
approved cartridge.
Verify the number to be deleted
and try again.
Or, delete the number after the
delayed fax job has been sent.
Load paper in the paper tray. See
page 2.7.
Check the display to see if there
are any scheduled jobs. The
display should indicate them in
Standby mode; for example,
Delay Fax.
Clear the jam. See page 9.5 and
page 9.6.
Clear the jam. See page 9.7.
Clear the jam. See page 9.9.
The job which you were trying to
do before the power failure must
be completely re-done.
Cancel unnecessary priority fax
jobs.
You can press Enter to
immediately redial, or Stop/
Clear to cancel the redial
operation.