Selecting A Nav/Com Frequency Using Rotary Knobs; Frequency Flip/Flop; Voice Commands; Monitored Radios - Garmin GTN 725 Reference Manual

Selecting a NAV/COM Frequency using Rotary Knobs

Press the center of the
display to the NAV frequency display.
1. Turn or momentarily press the small right knob once to highlight the
STBY field of COM or NAV. The knob function defaults to COM after 30
seconds of inactivity.
2. Turn the large right knob to the desired MHz value.
3. Turn the small right knob to the desired kHz value.
4. Press the small right knob to confirm entry.

Frequency Flip/Flop

To flip/flop the active and standby NAV/COM frequencies, press and
hold the small knob or touch the active NAV/COM frequency field. An
annunciation, Hold for Flip-Flop, will be displayed near the knobs.

Voice Commands

If a GMA 35 is connected to the GTN, voice commands may be available.
For a complete description of the voice recognition feature refer to GTN
6XX/7XX Telligence Voice Command Guide, P/N 190-01007-50.

Monitored Radios

The Monitor function indicates which radios are being listened to by the
crew and passengers.

Mic Selection

Use the Audio Panel page to select the microphone for transmitting. Mic
selection can be accomplished by touching the
page.
4
small right knob to change the COM frequency
GTN 725/750 Cockpit Reference Guide
Audio Panel
key on the main
190-01007-04 Rev. K