Removing Excess Humidity - Samsung AW0801B Owner's Instructions Manual

Removing Excess Humidity

Remote Control
Control Panel
10
E-
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
You can operate the Dry mode only by using the control panel.
1 If necessary, press the
Result: The air conditioner starts up in the mode selected when
the unit was last used.
The unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
It will start up normally after three minutes.
2 If the dry indicator is not displayed at the top of the control panel,
press the button on the control panel one or more times until it
appears.
Result: The unit beeps each time you press the
The air conditioner runs in Dry mode.
You can change modes at any time.
3 To adjust the temperature, press the
more times until the required temperature is displayed.
Possible temperatures are between 64°F and 86°F inclusive.
Result: Each time you press the
- The temperature is adjusted by 1°F
- The unit beeps
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4 To control the direction of the air flow, refer to page 11.
(On/Off) button.
or buttons one or
or buttons:
button.