Convection Element - GE JK3800DH1BB Technical Service Manual

Convection Element

The Convection Element provides an additional
Convection Element Removal
1. Remove the four T20 Torx screws from the
convection cover.
2. Remove the six T20 Torx screws from the rear
3. Remove the four T20 Torx screws that are
securing the element.
4. Pull the element forward and remove the wires.
Convection Element Reinstallation
1. Reinstall the wires and push the element
forward.
2. Reinstall the four T20 Torx screws.
3. Reinstall the six T20 Torx screws on the rear
4. Reinstall the four or six T20 Torx screws
(depending on model) to the convection cover.
– 69 –