Removing Upper Oven - GE JK3800DH1BB Technical Service Manual

CAUTION: Upper oven weighs 68 lbs. Use two men or the oven dolly for safe removal.
1. Open the door and remove all trays, racks, or other cooking utensils including the turntable ring.
2. Remove screws from side trims (see Installation section in this Guide).
3. Open and remove the lower oven door.
4. Remove the four Phillips head screws from the decorative middle trim and remove the trim.
5. Remove the four T20 screws from the black vent trim between the upper and lower oven and remove the
vent trim.
For 30" Models Only:
1. Remove the three 1/4 in. hex head screws from each of the two shipping brackets, remove the shipping
brackets. Brackets may be discarded.
2. Remove the two 1/4 in. hex head screws from the front of the sliding brackets under the upper oven.
3. Remove the two 1/4 in. hex head screws from the RJ-45 bracket, disconnect the harness from the RJ-45
board and remove the bracket assembly.
4. Disconnect the three-pin power connector and two-pin communication connector underneath the upper
oven.
5. Slowly slide the upper oven out of the cabinet.

Removing Upper Oven

– 42 –