THOMSON ACG905-C User Manual page 4

Safety
Safety Recommendations
Using Equipment Safely - Gateway
Your Advanced Cable Gateway has been manufactured to meet American safety standards, but
care must be taken to ensure proper performance.
It is important that you read this booklet completely, especially the safety instructions below. If
you have any doubts about the installation, operation, or safety of the Gateway, please contact
your Customer Service.
Avoiding the Risk of Electric Shock
• Disconnect the Gateway from the power source before you connect the Gateway to
(or disconnect it from) any other equipment. Avoid any contact with the power source,
which can be lethal or cause severe electric shock.
• Do not remove the cover of the Gateway. Should the Gateway fail, contact Customer
Service for repair or service.
• Do not insert anything into any opening of the case.
• Do not block the Gateway's ventilation slots; do not place it on unstable surfaces like
carpets.
• Do not put anything on the Gateway which might spill or drip into it
candles or liquids containers). Do not splash it with a liquid. If an object or liquid does
get inside the Gateway, unplug it immediately and contact Customer Service.
• Do not store the Gateway in excessively hot, cold, or damp conditions. The Gateway is
intended to operate at a temperature of less than 45 degrees and a maximum humidity
level of 75%.
• In case of a thunderstorm, it is recommended that you unplug the Gateway from the
power source and the antenna from the Gateway.
• Locate this equipment in such a way that the plug and power source are easily
accessible. That way you can disconnect quickly.
Connecting to the Power Supply
• This Gateway is designed to operate at 120VAC, 60Hz.
• If you are in any doubt about the
Customer Service.
Ensuring optimum performance
• Leave 3 to 4 inches of clearance around the Gateway to ensure proper ventilation to
the Gateway.
• Always place Gateway vertically.
• To clean the Gateway, use a dry, clean soft cloth with no cleaning solvent or abrasive
products. Clean the ventilation openings regularly.
Environmental Information
• The batteries contain some hazardous substances which pollute the environment.
Do not dispose of them with other articles. Take care to dispose of them at special
collecting points.
ii
power source, the plug, or connection, please consult
(e.g. lighted