Setting The Clock; Switching The Time Display Format (24 Hour/12 Hour) - JVC NX-PB15V Instructions Manual

Setting the clock

Setting the clock
Setting the clock
1
Display the clock setting screen
2
Select "Time Set"
"Time Set"
Timer
LCD Set Clock
Time Set
Time Format
3
Select "AM" or "PM"
The selected part lights yellow.
or
4
Adjust the value for "Hour," and "Minute"
or
"Clock"
System
The selected item
00:00
lights blue.
24H
• When "Time Format" is set
to "24H," "AM" or "PM" is not
displayed. Go to step 4.
Repeat this procedure.
5
Finish the clock setting by adjusting the minute
value of the last position
To return to the playback screen, press [LCD SET] or one of the source
buttons on the remote control. To return to the home screen, press
[SOURCE] on the main unit.
• The clock may gain or lose 1 to 2 minutes per month. You may need to
readjust the clock periodically.
• If a power failure occurs, the clock loses its settings. You need to set
the clock again.
• To display the time on the monitor of the main unit, press [DISPLAY]
after setting the clock (the time indication disappears in 5 seconds).
Switching the time display format
(24 hour/12 hour)
1
Select "Time Format" in step 2 of "Setting the
clock" on the left column
"Time Format"
2
Select the time format
Press [ 2 ] [ 3 ] to select "24H" or "12H. "
3
Confirm the entry
Press [ENTER]
To return to the playback screen, press [LCD SET] or one of the source
buttons on the remote control. To return to the home screen, press
[SOURCE] on the main unit.
9