Burnside T910 Quick Start Manual

a percentage level and in more
technical dBm units. You should
aim to get a level of at least 50%
or more. Although it is possible to
have a perfectly acceptable per-
formance with a weaker signal. If
you are located in a particularly
poor reception area, we can sup-
ply a higher performance an-
tenna.
 To set up call forwarding lift the
handset and dial 0#4250. You are
now prompted to enter the phone
number or use the phone book.
Enter a number such as
07123456789#. Note that the #
tells the terminal you are at the
end of the number. It will then
briefly show "Accepted". To tell
the terminal to now forward calls
to this number either replace the
handset (or navigate using the
key) to menu 423 (direct dial
0#423). Press 0 to set forwarding.
The display will show line for-
warded.
 You can also set your local phone
to ring when the terminal forwards
a call by entering 0#422. To make
it easier for you to change the
setup store these key sequences
in the memory keys of your phone
if it has them.
 To set up call forwarding when
away from the office you can
send an SMS text message from
your mobile to the terminal. A
message nnnnFOR-
WARD07123456789 where nnnn
is the terminal PIN will forward
calls to mobile 07123456789.
362060 V2
The message nnnnCANCEL
cancels call forwarding. nnnn is
only required if the terminal PIN is
set. Default PIN is 1234. The ter-
minal will send a text message
back confirming that it has re-
ceived the new instruction.
 For more information please refer
to the manual on the supplied CD
or if you need help call us on:
Help Line: +44 (0)1 258 821 402

Burnside Telecom Ltd
Burnside House
Isington
Alton
GU18 5SA, UK
Tel: +44 (0)8 700 762 766
Email: info@burnsidetelecom.com
Web: www.burnsidetelecom.com
LCD specifications depend on model
Burnside Follow Me
T910 fixed cellular terminal
quick start guide
E&OE