Download Print this page

Advertisement

Quick Links

SPECIFICATION - PRESSURES
Minimum maintained pressure: 0.1 bar (10 kPa) - Maximum
maintained pressure: 5.0 bar (500 kPa)
USER MAINTENANCE
Cleaning
Many household cleaners contain abrasives and chemical substances,
and should not be used for cleaning plated or plastic fittings. These
finishes should be cleaned with a mild washing up detergent or soap
solution, and then wiped dry using a soft cloth.
De-scaling the Showerhead
Important! Keeping the showerhead clean and free from limescale
will ensure that your shower and showerhead continue to perform to
their maximum. A blocked showerhead can restrict the flow rate and
may cause damage to your shower.
Inspecting the Hose
Important! The shower hose should be inspected periodically for
damage or internal collapse, internal collapse can restrict the flow
rate from the showerhead and may cause damage to the shower.
Remove the shower hose from the shower, inspect and replace the
hose if necessary.
Unscrew the hose
from the showerhead
and the shower outlet.
GUARANTEE
The Mira Shower Fittings have been designed for domestic use only,
Mira Showers guarantee the fittings against any defect in materials
or workmanship for a period of one year from the date of purchase.
For non-domestic installations, Mira Showers guarantee the fittings
against any defect in materials or workmanship for a period of one
year from the date of purchase.
For terms and conditions, refer to the back cover of this guide.
Guarantee
Your product has the benefit of our manufacturer's guarantee which starts
from the date of purchase.
Within the guarantee period we will resolve defects in materials or
workmanship, free of charge, by repairing or replacing parts or product as
we may choose.
This guarantee is in addition to your statutory rights and is subject to
the following conditions:
The product must be installed and maintained in accordance with the
instructions given in this user guide.
Replacement under this guarantee does not extend the original expiry
date. The guarantee on any replacement parts or product ends at the
original expiry date.
The guarantee does not cover:
Non product faults (such as damage or performance issues arising
from incorrect installation, improper use, inappropriate cleaning, lack
of maintenance, build up of limescale, frost damage, corrosion, system
debris or blocked filters) or where no fault has been found with the product.
Compensation for loss of use of the product or consequential loss of
any kind.
Damage or defects caused if the product is repaired or modified by
persons not authorised by us or our appointed representative.
Use your thumb or a
What to do if something goes wrong
soft cloth to wipe any
If your product does not work correctly refer to this manual for fault diagnosis
limescale from the soft
and check that it is installed and commissioned in accordance with our
nozzles
instructions.
If this does not resolve the issue, contact us for help and advice.
Helpdesk Service - Our Customer Services Team is comprehensively
trained and can offer help and advice, spare parts and accessories.
Please provide your model name or number and date of purchase.
Showers Website (www.mirashowers.co.uk)
From our website you can download additional user guides, diagnose
faults, purchase our full range of accessories and popular spares
and refer to our FAQs.
Spares and Accessories - We hold the largest stocks of genuine
Mira spares and accessories. Contact us for a price or visit our
website to purchase items from our accessory range and popular
spares.
To Contact Us
0844 571 5000
Fax: 01 242 282595
E-mail: Visit www.
mirashowers.co.uk/
Inspect the hose.
contactus
Mira Customer Services
Dept, Cromwell
Road, Cheltenham,
Gloucestershire, GL52 5EP
Mira is a registered trade mark of
Kohler Mira Limited.
The company reserves the right to alter
product specifications without notice.
1230751-W2-A (L16A/B/C)
CUSTOMER SERVICE
To Contact Us: Eire Only
01 531 9337
E-mail: CustomerServiceEire
@mirashowers.com
FM 14648
© Kohler Mira Limited, January 2014
Mira Beat and Nectar Shower Fittings
Mira Beat
Mira Nectar
These instructions must be left with the user
Installation and User Guide

Advertisement

loading

Summary of Contents for Mira Beat

  • Page 1 Remove the shower hose from the shower, inspect and replace the Spares and Accessories - We hold the largest stocks of genuine hose if necessary. Mira spares and accessories. Contact us for a price or visit our website to purchase items from our accessory range and popular spares.
  • Page 2 A hose retaining ring is supplied to prevent the showerhead Note! Check for vertical alignment before tightening. The M4 Screws 'A' (x2) Beat Showerhead 1703.196 from dropping below the spill over level of the bath or shower, mounting brackets are slotted to aid this alignment. Then fully 1703.351 (Single...

This manual is also suitable for:

Nectar