Table of Contents
Advertisement
BLUETOOTH OPERATION
General
You can use the Bluetooth in your car to make a
phone call hands-free or stream music onto your
in-car speakers (via this headunit).
Controls (fig. K)
Hang-up a call
1. After you have answered the phone call, and
vou wish to hanq-up. simolv short-oress the
@ button agatn-.
'
Music Streaming
lf your Bluetooth-enabled
music devrce has al-
ready been paired with this headunI before, sim-
ply turn on the Bluetooth lunction of your mus,c
device and the headunit will react accordingly.
. lf 'A2DP lST'was selected in SAIV, tnen rne
headunit will automatically
switch to Blue-
tooth source and starts music streamino onto
the in-car speakers.
Button
Bluetooth status
Handsfree
Music-
Inacrrve (HFPiHsP) "|ff#lt
(n.a.)
Rejecl phone
(incoming call)
Pfess more Answer phone
Answer
than 2 secs (incoming call)
phone *
to start
Hang-up phone (incom ng
pairing
(callactive)
call)
lf 'HFP 1ST'was selected in SAM. then the
headunit will lighFup the I
(if not already
lighted-up) only. You need to short-press the
R
button a few times to select Bluetooth.
lf 'ISTDEVlCE'was selected in SAM:
" Only when HFP lST'
s selected nside the SAw
Pairing
To pair your Bluetooth-enabled
device to this
headunit, make sure that no device is currently
streaming to this headunit first.
1 . Press the @ button for more than 2 seconds
to enter the pairing mode. The headunit will
enter into a "Find Me" mode.
2. Enable your device to perform a scan of
available devices to find the headunit.
For more details, please check the user manual
of your Bluetooth-enabled
device.
3. Once found, you should see "DAYTON" as
the found device and you can paif your de-
vice with the headunit.
4. The default 4-digit pin is "0000".
Note: Whenever there is at least one paired
device active, the headunit will light-up the Btue-
tooth icon.
Paired Devices
This headunit is able to store up to eight Blue-
tooth-enabled devices (consisting of a mixture of
mobile phones or music-players).
lf a ninth de-
vice starts pairing, it will replace the device that
was used longest ago.
Hands-Free Call
Answer a call
You will hear the rjng tone from the in-car speak-
ers.
1. To answer the call, sinply short-press the
@
button.
Reject a call
1. lf you do not wish to answer the incominq
call. simply short-press the jh, button.
+ No Bluetooth connection active:- Behav-
iour is same as'HFP '1ST'condition
+ An existing Bluetooth connection is ac-
tive:- status quo as the current Bluetooth
connection is first connected.
AUX OPERATION
This headunit comes with an Auxiliary input (3.5
mm jack) on the front for ease of streaming your
music from your portable devices.
1 . Insert your 3.5 mm plug (connected to your
portable device) into the front Aux input.
2. Short-press the R
button a few times until
the display shows "AUX".
3. Play your portable device.
SPECIAL FUNCTIONS
Clock
You can select automatic update of the clock
via the RDS radio signal or manually adjust the
clock yourself. The clock will be displayed when
the headunit is powered-off. In case you need
to save battery life, you may turn off the ctock
display too.
'1. Navigate the SAM to setect
CLOCK .
2. Turn the knob clockwise / anti-clockwise to
select the type of clock functions (RDS clock,
manual clock or clock off).
Note: lf you select 'MAN CLK', menu item,
'CLOCKSET',
is selectable as the next menu
item. Refer to the 'SorrWene nCCdSS UeruU
(SAM)'for adjusting the clock.
22
Advertisement
Table of Contents
