Table of Contents
Advertisement
10.13. Replacement for the pinch roller ass'y and head block
· Follow the (Step 1) - (Step 2) of Item 10.3 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 6) of Item 10.4 - Disassembly of CD Lid
· Follow the (Step 1) - (Step 3) of Item 10.6 - Disassembly of CD Mechanism Unit
· Follow the (Step 1) - (Step 3) of Item 10.10 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 5) of Item 10.11 - Disassembly of Deck Mechanism Unit
* The mechanism as shown below is for DECK1. For DECK
2, perform the same procedures.
Step 1 Release the 2 claws, and then remove the pinch roller
(R), (F).
Step 2 Release the 2 claws, and then remove the head
connector.
Step 3 Remove 2 screws.
33
SA-AK23 0GCP
Advertisement
Table of Contents
