AUTQMATIC BREAM-AWAY PROTECTION
The hydraulic brake system is equipped with a break-away cable or
chain. When towing, this cable or chain should be attached loosely
to a frame member of the tow vehicle leaving enough clearance so
that the trailer can turn freely without actuating the break-away
device.
Should the trailer separate from the tow vehicle, the break-away
cable will actuate the master cylinder, locking the brakes. this will
stop the trailer in the shortest possibIe distance.
CAUTION: Break-away switch should be fully released
during vehicle operation.
CHECK BEFORE
TOWING.
CAUTION: Do not
use sway bars or equalizer bars on the
surge brake system.
BRAKE MAINTENACE
&
LUBRICATION
1. For best operation of the coupling
Fill
Cap
locking mechanism is best assured
by lubricating
the ball with stan-
/
dard automotive chassis grease.
2. Remove master cylinder cap and
make sure it is fulI of DOT 3
automotive brake fluid.
3. Brakes need to be checked and
adjusted once per year.
Consult
your individual brake
o w n e r ' s
manual for additional information
or consult your dealer regarding
this item.
SET-UP
OPENING YOUR JAYCO CAMPER
After parking your new Jayco tent camper, disconnect the coach
from the
tow
vehicle. Have the coach in a level position and tires
blocked so the camper will not roll anywhere. You are now ready
to set up your tent which is designed to be simple and trouble free.