AUTOMATIC BREAM-AWAY PROTECTION
The hydraulic brake system is equipped with a break-away cable or
chain. When towing, this cable or chain should b e attached loosely
to a frame member of the tow vehicle leaving enough clearance so
that the trailer can turn freely without actuating the break-away
device.
Should the trailer separate from the tow vehicle, the break-away
cable will actuate the master cylinder, locking the brakes. this will
stop the trailer in the shortest possible distance.
CAUTION:
Break-away switch should be f d y released
during vehicle operation.
CHECK BEFORE
TOWING.
CAUTION: DO
not
use
sway
bars or equalizer bars on the
surge brake system.
t
BRAKE MAINTIENACE
&
LUBRICATION
I . For best operation of the coupling
,
..
@ox
>-
'
locking mechanism is
best
assured
by lubricating the bail
with
stan-
__.~.-
I
dard
automotive chassis grease.
2. Remove master cylinder cap and
make sure
it
is full of DOT 3
automotive brake fluid.
3. Brakes need to be checked and
adjusted once per year.
Consult
vour individual brake
o w n e r ' s
manual for additional information
---
L - . . ,
, / h c
51,rc
or consult your dealer regarding
,
%\
I
r u
t i l l &
J ! , )
this item.
\ - - . + , '
SET-UP
OPENING YOUR JAYCO CAMPER
ANer parking your new Jayco ten.t camper, disconnect the coach
from the tow vehicle. Have the coach in a level position and tires
blocked so the camper will not roll anywhere. You are now ready
to set up your tent which is designed to be simple and trouble free.