Removing the Flat Tire and
Installing the Spare Tire
1. Do a safety check before proceeding. See Changing
a Flat Tire on page 5-82 for more information.
3. Turn the jack adjusting knob clockwise by hand to
raise the jack lift head.
4. Place the handle, extension, and wheel wrench
onto the jack.
5-86
2. Using the wheel
wrench, loosen all
the wheel nuts by
turning the nuts one
turn counterclockwise.
Do not remove
them yet.
Front Position
A. Front Frame/
Rear Axle
B. Jack
5. Place the jack in the appropriate position nearest
the flat tire.
Rear Position
C. Handle
D. Extension(s)
E. Wheel Wrench