License Plate Lamp
1. Remove the two screws holding the license plate
lamp lens.
2. Pull the lens away from the lamp assembly.
3. Pull the old bulb straight out from the bulb socket.
4. Push the new bulb into the socket until it clicks.
5. Replace the lamp assembly lens and tighten
the screws.
Replacement Bulbs
Exterior Lamp
Back-Up Lamp
Front Parking, Turn Signal Lamp
Front/Rear Sidemarker
License Plate Lamp
Halogen Headlamps
High-Beam
Low-Beam (Halogen Only)
Rear Turn Signal
Stoplamp and Taillamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
921
5702 NAK
194
W5W
9005
H11
3757 AK
3157
5-55