A Guide To Your Two-Way Blender - Sunbeam PB8080 User Manual

A Guide To Your Two-Way Blender

Pre-Programmed Functions
1. Press the ON/OFF button to turn the
blender on. The On indicator light will flash.
The light will come on, and remain on when
the motor is running.
2. Press the desired function button:
• GREEN/FROZEN SMOOTHIE
• FOOD CHOP/SALSA
• MILKSHAKES/FRAPPE
The corresponding function light will come
on, and remain on until the program is
finished.
3. To change your selection, press the STOP
button followed by another function button.
4. When the program is finished, the motor
automatically stops. You can press the Stop
button at any time to cancel the program.
The On indicator light will flash, showing
that the blender is ready to use.
Speed Functions
Your blender has three speeds: LOW, MED
and HI (1, 2 and 3). You can use these
functions for personal recipes or to continue
blending after a pre-programmed function is
finished.
1. Press the ON/OFF button to turn the
blender on. The On indicator light will flash.
The light will come on, and remain on when
the motor is running.
2. Press the desired speed button to start
blending. The corresponding speed light
will come on, and remain on until you press
the STOP button.
3. Press the STOP button to cancel processing
at any time.
Pulse Function
Use the pulse function to crush ice or chop
food.
1. Press the ON/OFF button. The On indicator
light will flash.
2. Press and hold the PULSE button. The
pulse function operates only as long as the
PULSE button is held down.
3. Release the PULSE button to stop.
Note: The appliance will start only if the
jug is correctly positioned on the motor
base.
5