A.1 How To Assign The Parameters For Signal Modules In The User Program - Siemens SIMATIC S7-300 Reference Manual

Parameter Sets for Signal Modules
In this chapter
Section
A.1
A.2
A.3
A.4
A.5
A.6
A.7
A.8
A.9
A.10
A.11
A.1 How to Assign the Parameters for Signal Modules in the
User Program
Parameter assignment in the user program
You have already assigned parameters to the modules in STEP 7.
In the user program, you can use a SFC:
• To reassign parameters to the module and
• To transfer the parameters from the CPU to the addressed signal module
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
How to Assign the Parameters for Signal Modules in the User
Program
Parameters of the Digital Input Modules
Parameters of the Digital Output Modules
Parameters of the Analog Input Modules
Parameters of the SM 331; AI 8 x RTD
Parameters of the SM 331; AI 8 x TC
Parameters of the SM 331; AI 8 x 13 bits
Parameters of the SM 331; AI 8 x 16 bits
Parameters of the Analog Output Modules
Parameters of the SM 332; AO 8 x 12 bits
Parameters of the Analog Input/Output Modules
Contents
A
Page
A-1
A-3
A-5
A-7
A-11
A-19
A-27
A-30
A-36
A-39
A-41
A-1