Using An External Display - Panasonic CF-27 series Reference Manual

Using an External Display

The optional port replicator (
(CF-VEB274) is required for use with an external display.
1
Power off your computer
Do not shut down using the suspend* or hibernation mode.
2
Connect the external display
NOTE
For more detailed information, refer to the operation manual of the port
replicator, the external display port adapter or the external display.
3
Turn on the external display, then turn on your computer with the
display opened and make settings during start-up
You can select either an external display, LCD or simultaneous with
F3 . In addition, you can set the display to use during start-up with the follow-
ing procedure.
1
Run the Setup Utility
2
Using
3
Using and
4
Using and
Enter
5
Press F10 , then select [Yes]
6
Select your external display
Set your external display for [Monitor] in [Start] - [Settings] - [Control
Panel] - [Display] - [Settings] - [Advanced].
When a monitor that does not conform to the Plug & Play standards is
connected, select [Change] and make the monitor settings.
page 31) or the external display port adapter
(
* With Windows 98, the "Suspend" is called "Standby".
( page 41)
and , select [Main]
, select [Display] and press Enter
, select the display to use and press
"Starting Up/Shutting Down")
33
Fn +