Panasonic CF-27 series Reference Manual page 23

Battery Power
Panasonic Battery Monitor
It is possible to display the current battery status and the remaining battery power by
running the Panasonic Battery Monitor.
1
Select from the taskbar or select [Panasonic Battery Monitor]
from [Start] - [Programs] - [Panasonic]
2
Click [Detail]
NOTE
The deviations for the estimated time can occur depending on the condition of
the battery.
There are cases [0] (indicating a full charge) may be shown for the [Estimated
Time until fully charged] even if the remaining battery power is about 97% (e.g.,
when unplugging then plugging the AC adapter above 95%).
When the Panasonic Battery Monitor is being displayed, the System standby
(Suspend timeout function, [Power Schemes] in [Control Panel] - [Power Man-
agement]) will not work.
Battery Status
AC: AC adapter connected (fully charged)
AC-Charging: AC adapter connected (charging)
Battery-Discharging: No AC adapter (discharging)
Remaining battery power
Estimated time until fully charged during Power
On
Estimated time until fully charged during Power
Off
This program will be closed after removing
the check mark, then clicking [OK]
Battery voltage
Battery current*
Average current* for the most recent one minute
Battery capacity (fully charged)
Battery temperature (degree)
Battery type
Battery capacity (specified)
Battery voltage (specified)
* The charging current or the discharging
current is displayed.
23