Port Replicator - Panasonic CF-27 series Reference Manual

Hide thumbs Also See for CF-27 series:

Table of Contents

Port Replicator

Expansion Bus Connector

A port replicator is available as an option (CF-VEB272A). This device eliminates the

hassles of having you connect/disconnect the various cables when carrying your com-

puter around and allows a variety of peripherals to be connected including a head-

phone, microphone, or external display, etc.

The port replicator connects to the expansion bus connector on the back of your com-

puter.

For more detailed information, refer to the operation manual of the port replicator.

CAUTION

The serial port B of the port replicator cannot be used with the default settings.

Hot/Warm Docking and Hot/Warm Undocking are not possible with the port

replicator.

Setting the Port Replicator

To be able to use the serial port B of the port replicator, be sure to follow the steps

below.

Turn your computer on.

When the message [Press <F2> to enter SETUP] is displayed, press F2 and

then run the Setup Utility.

Select [Advanced] menu and set [Serial Port B] to [Enable] and [Device] to [Port

Replicator].

Press F10 . At the confirmation message, select [Yes] and press Enter . The

computer will reboot.

Table of Contents