Table of Contents
Advertisement
Table 5. Steps for different installation scenarios (continued)
New system (control
enclosure and one or
New system (control
more expansion
enclosure only)
enclosures)
1
Complete these steps for each expansion enclosure that you add.
2
Complete these steps for each control enclosure and expansion enclosure that you add.
Be familiar with the following information
v See "Caution notices for the Storwize V7000" on page x and "Danger notices for
Storwize V7000" on page xiii for a summary of the situations that can be
potentially hazardous to you. Before installing, read and understand the
following caution and danger statements.
v Use safe practices when lifting. The fully populated enclosure weighs about 37
kg (82 lbs). At least three people are required to lift and install the enclosure into
the rack or to remove an enclosure from the rack.
CAUTION:
Use safe practices when lifting.
18-32 kg (39.7-70.5 lbs)
32-55 kg (70.5-121.2 lbs)
(27)
Also keep in mind that a rack full of equipment is extremely heavy.
DANGER: Heavy equipment–personal injury or equipment damage might
result if mishandled. (D006)
v The following general precautions should be observed, even though the
power-on steps differ slightly from the directions that you will follow for this
product:
Adding control
Adding expansion
enclosures and
enclosures to an
expansion enclosures
existing system
to an existing system
55 kg ( 121.2 lbs)
Chapter 1. Before you begin the installation
3
Advertisement
Table of Contents
