Advertisement
2. Attach the grass bag to the frame with the quick-
action clips.
To change the product to bagging
mode
Rear bagging mode collects grass clippings in the
grass catcher.
CAUTION: Do not operate the product
without the rear door closed or the
approved grass catcher in position. Do
not try to operate the product with the
rear door removed or open.
1. Lift the rear door and put the grass catcher frame
hooks on the rear door pivot.
2. Release the rear door and put it on top of the
grass bag frame.
3. Remove the side discharging deflector, if
installed, and let the side discharge guard close.
Make sure that the side discharge door is tightly
closed against the product.
To change the product to mulching
mode
The mulching mode of the product makes grass
clippings smaller. The grass clippings then fall onto
the lawn and across the grass. Mulched grass
biodegrades quickly to give nutrients for the lawn.
1. Lift the rear door and remove the grass bag, if
installed, and let the back shield close. Make
sure that the rear door is tightly closed against
the product.
355 - 002 - 03.10.2017
2. Remove the side discharging deflector, if
installed, and let the side discharge guard close.
Make sure that the side discharge door is tightly
closed against the product.
To change the product to side
discharging mode
The side discharging mode of the product is the best
cutting mode for a battery powered electrical mower.
If you try to cut a large quantity of grass and
experience bogging of the motor, or have decreased
operation time, change the product to side
discharging mode to increase performance and
operation time.
1. Lift the rear door and remove the grass bag, if
installed.
2. Let the rear door close. Make sure that the rear
door is tightly closed against the product.
3. Open the side discharge guard and install the
side discharge deflector.
4. Let the side discharge guard close against the
deflector. Make sure that the deflector is tightly in
position before you operate the product.
To set the cutting height
The cutting height can be adjusted to 5 (1-5)
different positions. Lift the wheels for a lower cut and
lower the wheels for a higher cut. The medium
position is best for most lawns.
Note: The adjuster lever is spring
loaded.
1. Squeeze the height adjuster lever in the direction
of the wheel.
7
Advertisement
