Advertisement
•
Examine the blade for damage and cracks in 25
hour intervals. Replace blades more frequently if
you cut in sandy soil.
•
Lubricate the product in 25 hour intervals.
•
Clean and fully charge the battery pack after use
and after storage. Charge the battery pack for
max. 24 hours before storage.
•
Do not keep the battery pack on the battery
charger during storage. Charge the battery pack
for a maximum of 24 hours.
To clean the product
•
Use a brush to remove unwanted material and
grass on the product.
•
Keep unwanted material off finished surfaces
and wheels.
•
Use a scraper below the product to remove the
buildup of grass and waste.
•
Do not use a high pressure washer to clean the
product.
•
Do not flush water directly on the electrical
powerhead or battery contacts.
•
When you clean below the product, remove the
battery pack and put the product on its side with
the user control interface pointing up.
CAUTION: Do not clean the product with
water, cleaning fluids or solvents.
Remove unwanted material external to
the product with a soft brush or dry cloth
that does not contain metal.
To clean the grass catcher
•
Pores in cloth grass catchers can become filled
with dirt and dust during operation. This causes
the grass catcher to collect less grass. To
prevent this, regularly hose the grass catcher off
with water and let dry before using.
•
Examine the grass catcher frequently for wear or
deterioration. Replace if necessary.
To examine the door and deflector
The rear door and rear deflector are attached
between the rear wheels of the product. They
decrease the risk of objects that may be ejected in
the direction of the mow position of the operator.
1. Make sure that the rear door and rear deflector
are not damaged.
2. Examine the rear door and rear deflector. Make
sure that there are no defects that push the door
to close, including cracks or broken springs.
3. Replace the rear door and rear deflector or the
springs if they are damaged.
To replace the side discharge
deflector
The side discharge deflector is attached to the side
discharge opening of the product. It decreases the
10
risk of objects to eject in the direction of the mow
position of the operator.
1. Make sure that the side discharge deflector is not
damaged.
2. Examine the side discharge deflector. Make sure
that you do not see defects, such as cracks or
broken springs that push the door to close.
3. Replace the side discharge deflector or the
springs if they are damaged.
To sharpen and balance the blade
For best results, keep the blade sharp. Replace a
bent or damaged blade.
CAUTION: Use gloves, and/or wind the
blade with a heavy cloth, to prevent
damage to your hands .
1. Sharpen the blade with a file or on a grinding
wheel. Do not sharpen the blade when it is
installed on the product.
CAUTION: We do not recommend
that you sharpen the blade. If you do,
make sure that the blade is
balanced. A blade that is not
balanced can cause damage to the
product or motor.
2. Put a straight nail in a piece of wood or a wall.
Make sure you can see 2-3 cm of the nail.
3. Put the center hole of the blade on the head of
the nail. If the blade is balanced, it must stay in a
horizontal position. If one of the two ends of the
blade moves down, sharpen the heavy end until
the blade is balanced.
To replace the blade
CAUTION: Use gloves, and/or wind the
blade with a heavy cloth, to prevent
injury to your hands.
1. Always remove the battery pack before you do
maintenance.
2. Lock the blade with a block of wood.
3. Remove the blade bolt.
4. Remove the blade.
355 - 002 - 03.10.2017
Advertisement
