Mitsubishi Electric MELSEC FX2N-32DP-IF Hardware Manual page 26

FX2N-32DP-IF Profibus-DP Interface Unit
9) The terminal tightening torque is 0.5 to 0.8 N•m. Tighten securely to avoid malfunction.
10)The terminal screws of FX
FX , FX
0N 2N
(0.12"). The crimp style terminal (see drawing) suitable for use with these screws should be
fitted to the cable for wiring.
When installing 1 or 2 crimp terminal to a terminal, see each explanation below. However, 3
crimp terminals or more cannot be installed to a single terminal.
-32DP-IF is M3.5 (0.14"). However, the terminal screws of the
2N
Series extension I/O units/blocks and special function units/blocks are M3
Mounting and Wiring 2
2-6