Mitsubishi Electric MELSEC FX2N-32DP-IF Hardware Manual page 24

FX2N-32DP-IF Profibus-DP Interface Unit
Figure 2.4: Remove from DIN Rail
ƒ
*1 Uses DIN 46277 <35mm (1.38")>
2) Direct Mounting to Back Walls
The 32DP-IF can be mounted with M4 screws by using the direct mounting holes.
An interval space between each unit of 1 ~ 2 mm is necessary.
For mounting hole position of 32DP-IF, refer to section 1.2. Further information about exten-
sion I/O units/blocks can be found in the FX
special function units/blocks can be found in each manual.
„
Hardware Manual. Further information about
2N
Mounting and Wiring 2
2-4