Elation eNODE 4 User Manual page 8

S A F E T Y I N S T R U C T I O N S A N D G U I D E L I N E S
DO NOT
shake device, avoid brute force when installing and/or operating.
DO NOT
operate fixture if the power cord has become frayed, crimped, damaged
and/or if any of the power cord connectors are damaged and do not insert into the
fixture securely with ease.
power cord or any of its connectors are damaged, replace it immediately with a new one
of similar power rating.
DO NOT
block any air ventilation slots. All fan and air inlets must remain clean and
never blocked.
Always disconnect device from main power source before performing any type of
service and/or cleaning procedure. Only handle the power cord by the plug end, never
pull out the plug by tugging the wire portion of the cord.
Use the original packaging and materials to transport the device in for service.
www.elationlighting.com
NEVER
force a power cord connector into the fixture. If the
8