Elation eNODE 4 User Manual page 13

MAIN MENU SUB MENU
1.Rename Device Rename
2.Set IP Address IP Address
3.Set Netmask Netmask
1.DMX Port1
2.DMX Port2
4.Set DMX Port 3.DMX Port3
4.DMX Port4
5.Exit
5.Set ID NO. Device ID
6.Set LCD
LCD Backlight
Backlight
7.User Preset User Preset
8.Version Version
9.Exit
ELATION eNode 4 S Y S T E M M E N U
Features subject to change without any prior written notice.
Supports Software Version: ≥ V1.6
OPTIONS / VALUES
(Default Settings in BOLD)
eNode 4
002.010.010.002
A. 255.000.000.000
B. 255.255.000.000
C. 255.255.255.000
Output, Input, Disabled
1.Port Status
Single, HTP, LTP,
2.Port Mode
Backup, RDM, zero
040, 010, 015, 020, 025,
3.Framertf/fs
030, 035
001 - 128
4.Net
5.Principal 001-256
009, 001-256
6.Secondary
7.Resend Disabled, 001-256
Hold, Null, Blackout
8.DMX State
9.Display Mode Dec/256, Hex/F.F
10.Exit
001, 000-255
1.ON
2.OFF
1.4 X Input
2.DMX Split 1-3
3.ArtNet Clone
4.Isolated mode
5.Output HTP
6.Output LTP
7.Output Backup
8.Factory Settings
9.Exit
V1.x
13
DESCRIPTION
Select 1-16 Characters to Rename Device
Set Device IP Address
Each IP Address MUST be unique
Select Netmask Address
Select DMX Port Status
Select DMX Port Mode
RDM not supported in current software release
Select DMX Frame Rate
Only available for PORT STATUS = OUTPUT
Set Sub Net
Set Principal Universe
Set Secondary Universe
Enable Resend
Set How Connected Devices React to a Loss
of DMX Signal
Select Binary or Hex Display Mode
Exit Set DMX Port Menu
Select Device ID
Backlight Stays ON Always
Backlight Auto Turns OFF After 30 Seconds
8 Ports DMX IN
1 Port=DMX IN and 3 Ports=DMX OUT
Art-Net IN Ports 1-2, Clone Art-Net OUT Ports 3-4
NO DMX Input Signals Passed to Any Outputs
Highest Takes Precedence
Latest Takes Precedence
Backup Mode
Reset All Settings to Factory Default
NOTE: ALL SETTINGS RESET TO DEFAULT!
Exit User Preset Menu
Software Versions
Exit Main Menu
www.elationlighting.com