Advertisement
Quick Links
WNI20NC0301/ WNI20NC0302
User Guide
REV 0.0
Samsung Electro-Mechanics
2013-01-25
REV 0.0
© 2012 Samsung Electro-Mechanics. All rights reserved
The names of actual companies and products mentioned
herein may be the trademarks of their respective owners.
No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any
means without the express written consent of Samsung
Electro-Mechanics.
This document is subject to change without notice.
Samsung Electro-Mechanics Proprietary and Confidential
User Guide
1
Advertisement
Related Manuals for Samsung WNI20NC0301
Summary of Contents for Samsung WNI20NC0301
- Page 1 No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Samsung Electro-Mechanics. This document is subject to change without notice.
-
Page 2: Table Of Contents
User Guide Table of Contents INTRODUCTION ........................3 MECHANICAL DIMENSION ....................4 PIN ASSIGNMENT ....................... 5 DATA CONNECTOR AND FPCB SPEC................... 6 REVISION HISTORY......................7 REV 0.0 Samsung Electro-Mechanics Proprietary and Confidential... -
Page 3: Introduction
User Guide 1 Introduction The WNI20NC0301 / WNI20NC0302 will be embedded on the Chief River platform. The module is interfaced to the system Through an I2C interface to the Manageability Engine(ME) on the platform which exposes the device to the host OS <Figure 1: Mobile platform with embedded NFC Radio and Module>... -
Page 4: Mechanical Dimension
User Guide 2 Mechanical Dimension Parameter Conditions Min. Nom. Max. Unit Dimension 12.3 12.4 12.5 13.2 13.3 13.4 Height 1.55 <Table 1: Mechanical Design> REV 0.0 Samsung Electro-Mechanics Proprietary and Confidential... -
Page 5: Pin Assignment
Ground Do not connect SE-DIN-DIO Do not connect SE-DOUT-CLK Single Wire connection to the SIM card POWER_I Digital Power Supply MOD_VDD POWER_I Host interface supply voltage input VDD_IO Ground <Table 2: Pin Description> REV 0.0 Samsung Electro-Mechanics Proprietary and Confidential... -
Page 6: Data Connector And Fpcb Spec
User Guide 4 Data Connector and FPCB Spec. <Figure 2: Data Connector Dimension> Pin#1 <Figure 2: FPCB Dimension> Datasheet is available from next link http://www.kyocera-elco.com/prdct/pdf /6299.pdf Instruction manual is available from next link. http://www.kyocera-elco.com/prdct/impdf/20503174.pdf REV 0.0 Samsung Electro-Mechanics Proprietary and Confidential... -
Page 7: Revision History
User Guide 5 Revision History Revision Date Descriptions 2013-01-25 Created. REV 0.0 Samsung Electro-Mechanics Proprietary and Confidential...