Wiring Diagram - Broan ERVS100 Installation And User Manual

7 Wiring Diagram

• Risk of electric shock. Before performing any maintenance or servicing, always disconnect the unit from its
power source or turn power off at service panel.
• This product is equipped with an overload protection (fuse). A blown fuse indicates an overload or a short-circuit
situation. If the fuse blows, unplug the product and check the polarity and voltage output from the outlet. Replace
the fuse as per the servicing instructions (refer to wiring diagram for proper fuse rating) and verify the product. If
the replaced fuse blows, it may be a short-circuit and the product must be discarded or returned to an authorized
service center for examination and/or repair.
!
WARNING
14