Lens Adjustments - Runco Reflection VX-5000ci Owner's Operating Manual

Lens Adjustments (Zoom / Focus / Shift)
Lens zoom and focus are motorized adjustments that are adjustable from the remote control. This is to allow the
installer to adjust focus while at the screen for accurate results. The remote control has over 100' of range to the
projector for long throw distances. The IR Receiver for the lens motor assembly is located on the projector behind
the front RUNCO logo cover. Rotate the logo cover 90 degrees as shown above to reveal the 0.5" diameter IR
Receiver opening.
With IR Receiver revealed on the front of the projector, go to the zoom / focus page of the remote control and
adjust from the screen location for proper size and focus. Be sure to aim the remote toward the projector for best
range. 100' range for lens zoom and focus. The zoom buttons will size the image. Use the focus buttons at the
screen location to resolve the individual pixels.
14
IR receiver for lens
zoom / focus motors