Main Menu; Input Source; Aspect Ratio - Runco VX-33I VX-33I Installation & Operation Manual

The Main Menu is the starting point for accessing all projector functions.
(The Calibration and Service menus are hidden and not accessible until you enter a
passcode.)
From the Main Menu, select Input Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in this example, Composite is the
active source.
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press ENTER or SELECT. Select the appropriate aspect ratio
for your screen size and the type of program material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by a "
selected.
The aspect ratio selection is automatically saved for each input and
Note
resolution.
Runco VX-33i Installation/Operation Manual
" to its left; in this example, 16:9 is
47

Main Menu

Runco Video

Input Source

Aspect Ratio

Picture
Input Position
Memory Presets
Information
Calibration
Service
Input Source
Input Source
> Composite
S-Video
Component RCA (HD1)
Component BNC (HD2)
Component PC (HD3)
RGB RCA (HD1)
RGB BNC (HD2)
RGB PC (HD3)
HDMI 1
HDMI 2
Aspect Ratio
Aspect Ratio
16:9
4:3
Letterbox
VirtualWide
Cinema
Virtual Cinema